ISO 80601-2-67:2026

مواصفة قياسية دولية   الإصدار الحالي · اعتمدت بتاريخ ١٠ أبريل ٢٠٢٦

Medical electrical equipment — Part 2-67: Particular requirements for basic safety and essential performance of oxygen-conserving equipment

ملفات الوثيقة ISO 80601-2-67:2026

الإنجليزية 59 صفحات
الإصدار الحالي
USD 259.98

مجال الوثيقة ISO 80601-2-67:2026

This document is applicable to the basic safety and essential performance of oxygen conserving equipment, hereafter referred to as ME equipment, in combination with its accessories intended to conserve supplemental oxygen by delivering gas intermittently and synchronized with the patient's inspiratory cycle, when used in the home healthcare environment. Oxygen conserving equipment is typically used by a lay operator.

NOTE 1        Conserving equipment can also be used in professional health care facilities.

This document is also applicable to conserving equipment that is incorporated with other equipment.

EXAMPLE            Conserving equipment combined with a pressure regulator[4], an oxygen concentrator[12] or liquid oxygen equipment[7].

This document is also applicable to those accessories intended by their manufacturer to be connected to conserving equipment, where the characteristics of those accessories can affect the basic safety or essential performance of the conserving equipment.

This document is intended to clarify the difference in operation of various conserving equipment models, as well as between the operation of conserving equipment and continuous flow oxygen equipment, by requiring standardized performance testing and labelling.

This document is only applicable to active devices (e.g. pneumatically or electrically powered) and is not applicable to non-active devices (e.g. reservoir cannulas). 

If a clause or subclause is specifically intended to be applicable to ME equipment only, or to ME systems only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME equipment and to ME systems, as relevant.

Hazards inherent in the intended physiological function of ME equipment or ME systems within the scope of this document are not covered by specific requirements in this document except in IEC 60601‑1:2005+AMD1:2012+AMD2:2020, 7.2.13 and 8.4.1.

NOTE 2        Additional information can be found in IEC 60601-1:2005+AMD1:2012+AMD2:2020, 4.2.

الأكثر مبيعاً

YSMO GSO 150-2:2020
GSO 150-2:2013 
لائحة فنية يمنية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
GSO 9:2022
 
لائحة فنية خليجية
بطاقات المواد الغذائية المعبأة
YSMO GSO 2055-1:2020
GSO 2055-1:2015 
مواصفة قياسية يمنية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال

اعتمدت مؤخراً

IEC 81346-14:2026
 
مواصفة قياسية دولية
Industrial systems, installations and equipment and industrial products — Structuring principles and reference designations — Part 14: Manufacturing and processing systems
ISO 10583:2026
 
مواصفة قياسية دولية
Aerospace fluid systems — Test methods for fitting on tube assemblies
ISO 18379-1:2026
 
مواصفة قياسية دولية
Railway infrastructure — Ballastless track — Part 1: General requirements
ISO 8810:2026
 
مواصفة قياسية دولية
Plastics — Determination of residual peroxide — Gas chromatography method