ISO 11916-3:2021

International Standard   Current Edition
· Approved on 17 September 2021 ·

Soil quality — Determination of selected explosives and related compounds — Part 3: Method using liquid chromatography-tandem mass spectrometry (LC-MS/MS)

ISO 11916-3:2021 Files

English 23 Pages
Current Edition
150.93 USD

ISO 11916-3:2021 Scope

This document specifies the measurement of explosives and related nitrocompounds (as given in Table 1) in soil and soil materials. This document is intended for the trace analysis of explosives and related compounds by liquid chromatography–tandem mass spectrometry (LC-MS/MS). Generally, LC-MS/MS measurement shows the lower LOQ (limit of quantification) for each compound in Table 1 than using high-performance liquid chromatography (HPLC) with UV-detection (see Annex B and Annex C).

Under the conditions specified in this document, concentrations as low as 0,005 mg/kg to 0,014 mg/kg-dry matter can be determined, depending on the substance. Similar compounds, in particular various nitroaromatics, by-products and degradation products of explosive compounds can be analysed using this method provided that the applicability is checked on a case-by-case basis.

Best Sellers

GSO 150-2:2013
 
Gulf Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
YSMO GSO 150-2:2020
GSO 150-2:2013 
Yemeni Technical Regulation
Expiration dates for food products - Part 2 : Voluntary expiration dates
GSO 2055-1:2015
 
Gulf Technical Regulation
HALAL FOOD - Part 1 : General Requirements
YSMO GSO 150-1:2020
GSO 150-1:2013 
Yemeni Technical Regulation
Expiration dates for food products -Part 1 : Mandatory expiration dates

Recently Published

ISO 10319:2024
 
International Standard
Geosynthetics — Wide-width tensile test
ISO 18893:2024
 
International Standard
Mobile elevating work platforms — Safety principles, inspection, maintenance and operation
ISO 9842:2024
 
International Standard
Essential oil of rose (Rosa x damascena Miller)
ISO 5459:2024
 
International Standard
Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems