ISO 11916-3:2021

مواصفة قياسية دولية   الإصدار الحالي
· اعتمدت بتاريخ ١٧ سبتمبر ٢٠٢١ ·

Soil quality — Determination of selected explosives and related compounds — Part 3: Method using liquid chromatography-tandem mass spectrometry (LC-MS/MS)

ملفات الوثيقة ISO 11916-3:2021

الإنجليزية 23 صفحات
الإصدار الحالي
150.93 USD

مجال الوثيقة ISO 11916-3:2021

This document specifies the measurement of explosives and related nitrocompounds (as given in Table 1) in soil and soil materials. This document is intended for the trace analysis of explosives and related compounds by liquid chromatography–tandem mass spectrometry (LC-MS/MS). Generally, LC-MS/MS measurement shows the lower LOQ (limit of quantification) for each compound in Table 1 than using high-performance liquid chromatography (HPLC) with UV-detection (see Annex B and Annex C).

Under the conditions specified in this document, concentrations as low as 0,005 mg/kg to 0,014 mg/kg-dry matter can be determined, depending on the substance. Similar compounds, in particular various nitroaromatics, by-products and degradation products of explosive compounds can be analysed using this method provided that the applicability is checked on a case-by-case basis.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
YSMO GSO 150-2:2020
GSO 150-2:2013 
لائحة فنية يمنية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
GSO 2055-1:2015
 
لائحة فنية خليجية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال
YSMO GSO 150-1:2020
GSO 150-1:2013 
لائحة فنية يمنية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية

اعتمدت مؤخراً

ISO 10319:2024
 
مواصفة قياسية دولية
Geosynthetics — Wide-width tensile test
ISO 18893:2024
 
مواصفة قياسية دولية
Mobile elevating work platforms — Safety principles, inspection, maintenance and operation
ISO 9842:2024
 
مواصفة قياسية دولية
Essential oil of rose (Rosa x damascena Miller)
ISO 5459:2024
 
مواصفة قياسية دولية
Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems