GSO EN 13886:2011

EN 13886:2005
Gulf Standard   Current Edition · Approved on 12 October 2011

Food processing machinery - Cooking kettles equipped with powered stirrer and/or mixer - Safety and hygiene requirements

GSO EN 13886:2011 Files

GSO EN 13886:2011 Scope

1.1 This document specifies the safety and hygiene requirements for the design and manufacture of cooking kettles equipped with powered stirrer and/or mixer taking account of installation, operation, cleaning, removal of jammed food, feeding, maintenance and changing the tools. The cooking kettles equipped with powered stirrer and/or mixer are used from catering to small scale-food industry to cook, cool and mix all cold or hot food. They permit addition of ingredients during processing without stopping the machine. NOTE The kettle bowl can be fixed or equipped with a manually or power operated tilting mechanism. In the text that follows, the term "cooking kettles" is used to refer to the equipment covered by this document. This document covers cooking kettles equipped with powered stirrer and/or mixer having technical performances in accordance with the following: - thermal energy supply can be electricity, gas (see EN 125 and EN 161), steam or heat-conducting fluid; - capacity of the kettle: from 30 l to 600 l (nominal volume); - maximum power rating 80 kW; - speed of the powered stirrer: 10 rpm to 200 rpm; - maximum speed of the mixer: 3 000 rpm. The machines covered by this document are not intended to be cleaned with a high pressure water jet. This European Standard deals with all significant hazards, hazardous situations and events relevant to cooking kettles, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). 1.2 This document does not apply to: - domestic machines (i.e. capacity of kettles less than 30 l); - planetary mixers which are covered by EN 454; - food processors which are covered by EN 12852; - cooking kettles without powered stirrer and/or mixer having a manual tilting kettle. 1.3 This document does not deal with hazard due to the pressure on machines with a double jacket. NOTE Depending on the pressure and the volume of the double jacket, the cookin

Best Sellers From Mechanical Sector

GSO 42:2015
 
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
 
Gulf Technical Regulation
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS
GSO 98:1988
 
Gulf Technical Regulation
MOTOR VEHICLES- FLAMMABILITY OF INTERIOR MATERIALS AND THEIR TESTING METHODS
GSO 2698:2022
 
Gulf Standard
Technical Requirements for Electric Vehicles

Recently Published from Mechanical Sector

GSO ISO 8741:2026
ISO 8741:2025 
Gulf Standard
Fasteners — Reverse-taper grooved pins — Half-length progressive grooves
GSO ISO 8740:2026
ISO 8740:2025 
Gulf Standard
Fasteners — Parallel grooved pins, with chamfer point — Full-length diamond grooves
GSO ISO 34505:2026
ISO 34505:2025 
Gulf Standard
Road vehicles — Test scenarios for automated driving systems — Scenario evaluation and test case generation
GSO ISO 10972-1:2026
ISO 10972-1:2025 
Gulf Standard
Cranes — Requirements for mechanisms — Part 1: General