GSO 906:1997
IEC 60358:1990
Gulf Standard
·
Edition 1
Current Edition
·
Approved on
15 October 1997
Coupling capacitors and capacitor dividers
GSO 906:1997 Files
Arabic
48 Pages
Current Edition
USD
64.0
English
31 Pages
Current Edition
Reference Language
USD
52.0
GSO 906:1997 Scope
This standard is applicable to:
a) coupling capacitors for power line carrier (PLC) systems on high voltage overhead power lines the power-frequency range being 15 Hz to 60 Hz and the carrier frequency range 30 kHz to 500 kHz;
b) capacitor dividers or capacitor voltage transformers. Additional requirements for capacitor voltage transformers are given in the standard approved by GSO concerned with “Voltage transformers" (1);
c) capacitors with one terminal either permanently earthed or at low voltage as used for overvoltage protection and other similar uses.
Best Sellers From Electrical Sector
YSMO GSO 2530:2023
GSO 2530:2016
Yemeni Technical Regulation
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
GSO 2530:2016
Gulf Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
GSO 34:2007
Gulf Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR
MOTOR VEHICLES AND INTERNAL
COMBUSTION ENGINES
GSO 35:2007
Gulf Standard
Methods of test
for lead-acid starter batteries used for motor vehicles
and internal combustion engines
Recently Published from Electrical Sector
GSO IEC 60691:2025
IEC 60691:2023
Gulf Standard
Thermal-links - Requirements and application guide
GSO IEC 60335-2-65:2025
IEC 60335-2-65:2023
Gulf Standard
Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances
GSO IEC 62841-2-18:2025
IEC 62841-2-18:2024
Gulf Standard
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-18: Particular requirements for hand-held strapping tools
GSO IEC 63241-1:2025
IEC 63241-1:2023
Gulf Standard
Electric motor-operated tools - Dust measurement procedure - Part 1: General requirements