GSO IEC 63402-1:2026
IEC 63402-1:2025
Gulf Standard
Current Edition
·
Approved on
17 September 2026
Energy Efficiency - Customer Energy Management Systems -- Part 1: General Requirements and Architecture
GSO IEC 63402-1:2026 Files
No files for this standard are available in the store currently.
Obtaining this standard through the store is currently unavailable. You can acquire it directly from its source.
GSO IEC 63402-1:2026 Scope
IEC 63402-1:2025 specifies general requirements and the architecture between the Point of Common Coupling (PCC) and smart devices (SD) operating within the Smart Grid premises-side system (i.e. residential or commercial but not industrial premises).
This document does not include requirements for:
- safety
- electromagnetic compatibility (EMC);
- data security, as it is assumed that the underlying protocols will take the data security aspect into account
- special equipment (e.g. legacy heat pumps) with a direct physical connection to the grid, as such equipment bypasses the customer energy manager (CEM) and is not HBES/BACS enabled (covered by other standards than the IEC 63402 series).
This group EE publication is primarily intended to be used as an EE standard for the products mentioned in the scope, but is also intended to be used by TCs in the preparation of publications for products which are included in the boundary mentioned in the scope of this document.
It has the status of a group energy efficiency publication in accordance with IEC Guide 118.
This document does not include requirements for:
- safety
- electromagnetic compatibility (EMC);
- data security, as it is assumed that the underlying protocols will take the data security aspect into account
- special equipment (e.g. legacy heat pumps) with a direct physical connection to the grid, as such equipment bypasses the customer energy manager (CEM) and is not HBES/BACS enabled (covered by other standards than the IEC 63402 series).
This group EE publication is primarily intended to be used as an EE standard for the products mentioned in the scope, but is also intended to be used by TCs in the preparation of publications for products which are included in the boundary mentioned in the scope of this document.
It has the status of a group energy efficiency publication in accordance with IEC Guide 118.
Best Sellers From Electrical Sector
YSMO GSO 2530:2023
GSO 2530:2016
Yemeni Technical Regulation
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
GSO 2530:2016
Gulf Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
GSO 34:2007
Gulf Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR
MOTOR VEHICLES AND INTERNAL
COMBUSTION ENGINES
GSO 35:2007
Gulf Standard
Methods of test
for lead-acid starter batteries used for motor vehicles
and internal combustion engines
Recently Published from Electrical Sector
GSO IEC 60884-2-7:2026
IEC 60884-2-7:2025
Gulf Standard
Plugs and socket-outlets for household and similar purposes - Part 2-7: Particular requirements for cord extension sets
GSO IEC TR 63411:2026
IEC TR 63411:2025
Gulf Standard
Grid connection of offshore wind via VSC-HVDC systems
GSO IEC 60809:2026
IEC 60809:2021
Gulf Standard
Lamps and light sources for road vehicles - Dimensional, electrical and luminous requirements
GSO IEC 61643-41:2026
IEC 61643-41:2025
Gulf Standard
Low-voltage surge protective devices - Part 41: Surge protective devices connected to DC low-voltage power systems – Requirements and test methods