ISO 8932-3:2026
International Standard
Current Edition
·
Approved on
15 May 2026
Meteorology — Radiosonde — Part 3: Laboratory test method for solar radiation error of temperature sensor in radiosonde
ISO 8932-3:2026 Files
English
28 Pages
Current Edition
USD
188.5
ISO 8932-3:2026 Scope
This document specifies a test method for estimating the magnitude of radiosonde temperature sensor warming, induced by direct solar radiation, based on variations in air pressure, temperature, ventilation speed, tilt angle of its supporting sensor boom, and light illumination angle on the boom through a laboratory evaluation. This document provides the following:
- technical requirements for a laboratory setup to measure the effect of direct solar radiation on radiosonde temperature measurement under simulated sounding conditions;
- a test procedure for estimating radiosonde temperature measurement errors due to direct solar radiation in the air pressure range of 3 hPa to 1 000 hPa, temperature range1) of −70 °C to 50 °C, ventilation speed range of 3 m∙s−1 to 7 m∙s−1 at a specified irradiance (e.g. 1 000 or higher), sensor boom tilt range2) from 0° to 45° with respect to the air ventilation direction and the range of light illumination3) angle from 0° to 90° with respect to the sensor boom plane;
- a method to evaluate uncertainty in the results under the test conditions.
Best Sellers
GSO 150-2:2013
Gulf Standard
Expiration dates for food products - Part 2 :
Voluntary expiration dates
GSO 2055-1:2015
Gulf Technical Regulation
Halal Products - Part 1 : General Requirements
GSO 9:2022
Gulf Technical Regulation
Labeling of prepackaged food stuffs
GSO 150-1:2013
Gulf Technical Regulation
Expiration dates for food products -Part 1 : Mandatory expiration dates
Recently Published
ISO 21611:2026
International Standard
Dentistry — Vocabulary for source conclusion for human identification by dental evidence
ISO 21815-4:2026
International Standard
Earth-moving machinery — Collision warning and avoidance — Part 4: Risk area and risk level for swing and rotation motion
ISO 4576:2026
International Standard
Plastics — Polymer dispersions — Determination of sieve residue
ISO 8553:2026
International Standard
Milk — Enumeration of microorganisms — Plate-loop technique at 30 °C