ISO 8932-2:2026
International Standard
Current Edition
·
Approved on
29 May 2026
Meteorology — Radiosonde — Part 2: Laboratory test method for errors in radiosonde humidity sensor calibration
ISO 8932-2:2026 Files
English
24 Pages
Current Edition
USD
160.04
ISO 8932-2:2026 Scope
The document specifies testing procedures for determining calibration error for radiosonde humidity sensors sampled from mass production batches based on varying the levels of relative humidity at atmospheric upper-air temperatures using a laboratory setup. This document provides:
- technical requirements for a laboratory setup to evaluate the calibration errors of radiosonde humidity measurement;
- a test procedure for evaluating calibration error of radiosonde humidity sensors for a temperature range1) of −90 °C to 35 °C and for a relative humidity of 1 %rh to 100 %rh. Note, this document, is based upon relative humidity calculated by the percentage of water vapour pressure divided by saturation water vapour pressure over liquid water, not over ice, even at temperatures below 0 °C; hence, the maximum relative humidity is less than 100 %rh below 0 °C;
- a method for evaluating the uncertainty for the measured radiosonde humidity calibration errors.
1) Currently, the lowest possible temperature of commercially-available climate chambers is approximately -75 °C. The temperature range can be adjusted based on the capability of the climate chamber used.
Best Sellers
GSO 150-2:2013
Gulf Standard
Expiration dates for food products - Part 2 :
Voluntary expiration dates
GSO 2055-1:2015
Gulf Technical Regulation
Halal Products - Part 1 : General Requirements
GSO 9:2022
Gulf Technical Regulation
Labeling of prepackaged food stuffs
GSO 150-1:2013
Gulf Technical Regulation
Expiration dates for food products -Part 1 : Mandatory expiration dates
Recently Published
ISO 21611:2026
International Standard
Dentistry — Vocabulary for source conclusion for human identification by dental evidence
ISO 21815-4:2026
International Standard
Earth-moving machinery — Collision warning and avoidance — Part 4: Risk area and risk level for swing and rotation motion
ISO 4576:2026
International Standard
Plastics — Polymer dispersions — Determination of sieve residue
ISO 8553:2026
International Standard
Milk — Enumeration of microorganisms — Plate-loop technique at 30 °C