ISO 8636-2:2024

مواصفة قياسية دولية   الإصدار الحالي · اعتمدت بتاريخ ٠٤ سبتمبر ٢٠٢٤

Machine tools — Test conditions for bridge-type milling machines — Part 2: Testing of the accuracy of travelling bridge (gantry-type) machines

ملفات الوثيقة ISO 8636-2:2024

الإنجليزية 48 صفحات
الإصدار الحالي
220.49 USD

مجال الوثيقة ISO 8636-2:2024

This document specifies, with reference to ISO 230-1, ISO 230-2 and ISO 230-7, geometric tests and tests to check the accuracy and repeatability of positioning of numerically controlled axes for general-purpose, normal accuracy bridge-type milling machines with a travelling bridge (gantry-type). This document also specifies the applicable tolerances corresponding to the above-mentioned tests.

This document provides the terminology used for the identification of the principal components of the relevant machine tools and the designation of axes with reference to ISO 841.

This document is applicable to machine tools with travelling bridge and fixed table. This document does not include single-column (open-sided) machine tools and those with fixed bridge and moving table.

This document deals only with the verification of the accuracy of the machine tool. This document does not apply to the testing of the machine tool operation (vibration, abnormal noise, stick-slip motion of components, etc.) nor to machine tool characteristics (such as speeds and feeds), which are generally checked before testing the accuracy.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
YSMO GSO 150-2:2020
GSO 150-2:2013 
لائحة فنية يمنية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
YSMO GSO 2055-1:2020
GSO 2055-1:2015 
مواصفة قياسية يمنية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال
GSO 2055-1:2015
 
لائحة فنية خليجية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال

اعتمدت مؤخراً

ISO 37303:2025
 
مواصفة قياسية دولية
Compliance management systems — Guidance for competence management
ISO 37302:2025
 
مواصفة قياسية دولية
Compliance management systems — Guidance for the evaluation of effectiveness
ISO 21740:2025
 
مواصفة قياسية دولية
Space systems — Launch window estimation and collision avoidance
ISO 7899-3:2025
 
مواصفة قياسية دولية
Water quality — Enumeration of intestinal enterococci — Part 3: Most probable number method