ISO 630-6:2023

International Standard   Current Edition · Approved on 08 November 2023

Structural steels — Part 6: Technical delivery conditions for seismic-proof improved structural steels for building

ISO 630-6:2023 Files

English 17 Pages
Current Edition
123.09 USD

ISO 630-6:2023 Scope

This document specifies qualities for steels for seismic-proof improved structural use. It is applicable to steel plates rolled on a reversing mill, wide flats, hot-rolled sections, which are used in the as-rolled condition, with the exception of grade SA440, which is normally produced using quenched and tempered or thermomechanical controlled process and normally intended for welded or bolted structures.

This document covers 5 steel grades and 7 qualities. Grades SA235, SA325, SA345, SA390 and SA440 are covered. Not all grades are available in all qualities, and some qualities have Charpy V‑notch requirements.

The steels specified in this document are applicable to hot-rolled plates, wide flats, and sections with a minimum nominal thickness of 6 mm and a maximum nominal thickness of 150 mm for steel plates, and a maximum nominal thickness of 140 mm for wide flats and hot-rolled sections.

This document does not include the following structural steels, some of which are covered by other International Standards:

     sheet and strip, e.g. ISO 4995 or ISO 4996;

     tubular products. e.g. ISO 12633-1, ISO 12633-2.

NOTE            The term "thickness" is considered as "nominal thickness", unless otherwise stated.

Best Sellers

GSO 150-2:2013
 
Gulf Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
YSMO GSO 150-2:2020
GSO 150-2:2013 
Yemeni Technical Regulation
Expiration dates for food products - Part 2 : Voluntary expiration dates
YSMO GSO 2055-1:2020
GSO 2055-1:2015 
Yemeni Standard
HALAL FOOD - Part 1 : General Requirements
GSO 2055-1:2015
 
Gulf Technical Regulation
HALAL FOOD - Part 1 : General Requirements

Recently Published

ISO/IEC 27404:2025
 
International Standard
Cybersecurity — IoT security and privacy — Cybersecurity labelling framework for consumer IoT
ISO 15076-1:2025
 
International Standard
Image technology colour management — Architecture, profile format and data structure — Part 1: Based on ICC.1:2022
ISO 16075-7:2025
 
International Standard
Guidelines for treated wastewater use for irrigation projects — Part 7: Golf courses and other sports fields
ISO 15087:2025
 
International Standard
Dentistry — Dental elevators