ISO 8100-1:2026
International Standard
Current Edition
·
Approved on
27 March 2026
Lifts for the transport of persons and goods — Part 1: Safety rules for the construction and installation of passenger and goods passenger lifts
ISO 8100-1:2026 Files
English
191 Pages
Current Edition
USD
280.52
ISO 8100-1:2026 Scope
This document specifies the safety rules for lifts permanently serving buildings and constructions and intended for the transport of persons or persons and goods. It applies to traction lifts, positive drive lifts and hydraulic lifts that:
- serve specific levels; and
- have a rated speed exceeding 0,15 m/s; and
- have an enclosed car; and
- move along guide rails inclined not more than 15° to the vertical; and
- are indoor or weather-protected.
This document also applies to the electrical equipment of these lifts including the lighting and socket outlets in the well.
This document specifies safety rules related to:
- persons to be safeguarded:
- users, including passengers, maintenance and inspection personnel;
- persons at the landings and outside of the well, or any machinery space and pulley room, who can be affected by the lift.
- property to be safeguarded:
- loads in the car;
- components of the lift installation;
- building in which the lift is installed.
This document does not specify additional requirements for:
- lifts serving buildings with requirements for seismic conditions;
- lifts serving buildings with requirements for accessibility;
- lifts exposed to vandalism;
- lifts which can be used for firefighting and evacuation purposes under firefighters control;
- lifts which can be used to support faster evacuation of persons with disabilities;
- the behaviour of the lift when the control system of the lift receives a recall signal(s) in the event of fire in a building.
This document is not applicable to passenger and goods passenger lifts, which are installed before the date of its publication.
Best Sellers
GSO 150-2:2013
Gulf Standard
Expiration dates for food products - Part 2 :
Voluntary expiration dates
YSMO GSO 150-2:2020
GSO 150-2:2013
Yemeni Technical Regulation
Expiration dates for food products - Part 2 :
Voluntary expiration dates
GSO 9:2022
Gulf Technical Regulation
Labeling of prepackaged food stuffs
YSMO GSO 2055-1:2020
GSO 2055-1:2015
Yemeni Standard
HALAL FOOD - Part 1 : General Requirements
Recently Published
ISO/IEC 30188:2026
International Standard
Digital twin — Reference architecture
ISO 2710-1:2026
International Standard
Reciprocating internal combustion engines — Vocabulary — Part 1: Terms for engine design and operation
ISO 4650:2026
International Standard
Rubber — Identification — Infrared spectrometric methods
ISO 24994:2026
International Standard
Plastics piping systems — Determination of selected metal and semi-metal migration values of plastic pipes, fittings and their joints