ISO 10300-2:2023

 
مواصفة قياسية دولية   الإصدار الحالي
· اعتمدت بتاريخ ٢٤ أغسطس ٢٠٢٣ ·

Calculation of load capacity of bevel gears — Part 2: Calculation of surface durability (macropitting)

ملفات الوثيقة ISO 10300-2:2023

الإنجليزية 35 صفحات
الإصدار الحالي
174.89 USD

مجال الوثيقة ISO 10300-2:2023

This document specifies the methods of calculation of the load capacity of bevel gears, the formulae and symbols used for calculation, and the general factors influencing load conditions.

The formulae in this document are intended to establish uniformly acceptable methods for calculating the load-carrying capacity of straight, helical (skew), spiral bevel, Zerol and hypoid gears. They are applicable equally to tapered depth and uniform depth teeth. Hereinafter, the term “bevel gear” refers to all of the gear types; if not, the specific forms are identified.

The formulae in this document take into account the known major factors influencing load-carrying capacity. The rating formulae are only applicable to types of gear tooth deterioration, that are specifically addressed in the individual parts of the ISO 10300 series. Rating systems for a particular type of bevel gears can be established by selecting proper values for the factors used in the general formulae.

NOTE            This document is not applicable to bevel gears which have an inadequate contact pattern under load (see Annex D).

The rating system of this document is based on virtual cylindrical gears and restricted to bevel gears whose virtual cylindrical gears have transverse contact ratios of εvα < 2. Additionally, for bevel gears the sum of profile shift coefficients of pinion and wheel is zero (see ISO 23509).

The user is cautioned that when the formulae are used for large average mean spiral angles (βm1 + βm2)/2 > 45°, for effective pressure angles αe > 30° and/or for large facewidths b > 13 mmn, the calculated results of this document should be confirmed by experience.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
YSMO GSO 150-2:2020
GSO 150-2:2013 
لائحة فنية يمنية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
GSO 2055-1:2015
 
لائحة فنية خليجية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال
YSMO GSO 150-1:2020
GSO 150-1:2013 
لائحة فنية يمنية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية

اعتمدت مؤخراً

ISO 11326:2024
 
مواصفة قياسية دولية
Ships and marine technology — Test procedures for liquid hydrogen storage tank of hydrogen ships
ISO 13209-4:2024
 
مواصفة قياسية دولية
Road vehicles — Open Test sequence eXchange format (OTX) — Part 4: Expanded extensions interface definition
ISO 16813:2024
 
مواصفة قياسية دولية
Building environment design — Indoor environment — General principles
ISO 11979-2:2024
 
مواصفة قياسية دولية
Ophthalmic implants — Intraocular lenses — Part 2: Optical properties and test methods