ISO 24146-1:2024

مواصفة قياسية دولية   الإصدار الحالي · اعتمدت بتاريخ ٢٤ مايو ٢٠٢٤

Ships and marine technology — Shipboard waste on inland navigation vessels — Part 1: On board management and handling

ملفات الوثيقة ISO 24146-1:2024

الإنجليزية 34 صفحات
الإصدار الحالي
USD 192.7

مجال الوثيقة ISO 24146-1:2024

This document provides requirements on the management of waste generated during the operation of inland navigation vessels, including handling, collection, separation, marking, treatment, and storage on board of the vessel. It also describes the ship-to-shore interface and the delivery of waste from the vessel to the reception station.

Small crafts or vessels can use this document to improve their waste management.

This document also provides information for segregating and managing waste that any reception station worldwide can expect from inland navigation vessels and concentrates on:

—     prevention/elimination/minimization of waste prior to sailing;

—     minimization of waste at the source on the inland vessel;

—     waste collection at the source;

—     waste segregation on the inland vessel into defined categories that are recognized globally and fit into any of the different waste categorization systems around the world;

—     waste minimization once segregated;

—     waste storage on board the vessel; and

—     health and safety concerns surrounding the handling, storage, and offloading of waste.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
YSMO GSO 150-2:2020
GSO 150-2:2013 
لائحة فنية يمنية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
GSO 9:2022
 
لائحة فنية خليجية
بطاقات المواد الغذائية المعبأة
YSMO GSO 2055-1:2020
GSO 2055-1:2015 
مواصفة قياسية يمنية
منتجات الحلال – الجزء 1: الاشتراطات العامة للأغذية الحلال

اعتمدت مؤخراً

ISO 20816-3:2026
 
مواصفة قياسية دولية
Mechanical vibration — Measurement and evaluation of machine vibration — Part 3: Industrial machines with operating speeds between 120 r/min and 30 000 r/min
ISO 20816-1:2026
 
مواصفة قياسية دولية
Mechanical vibration — Measurement and evaluation of machine vibration — Part 1: General guidelines
ISO 23375:2026
 
مواصفة قياسية دولية
Intelligent transport systems — Collision evasive lateral manoeuvre systems (CELM) — Requirements and test procedures
ISO 18722-2:2026
 
مواصفة قياسية دولية
Tobacco heating systems — Determination of aerosol collected mass and nicotine in the aerosol with a puffing regime according to the ISO 5501 series — Part 2: Aerosol heated tobacco products (aHTPs)