ISO 4254-8:2018

International Standard   Current Edition · Approved on 09 January 2018

Agricultural machinery — Safety — Part 8: Solid fertilizer distributors

ISO 4254-8:2018 Files

English 16 Pages
Current Edition
USD 123.11

ISO 4254-8:2018 Scope

ISO 4254-8:2018, intended to be used together with ISO 4254‑1, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed or self-propelled fertilizer distributors for solid fertilizer application in agriculture and to be used by one operator only, e.g. full width solid fertilizer distributors, solid fertilizer broadcasters, distributors with oscillating tube and line-distributors, as well as solid fertilizer distributors driven by an auxiliary engine. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.

ISO 4254-8:2018 deals with all the significant hazards (as listed in Annex A), hazardous situations and events relevant to solid fertilizer distributors, when they are used as intended and under the conditions foreseeable by the manufacturer (see Clause 4), excepting the hazards arising from:

- inadequate lighting of working area;

- inadequate visibility from drivers/operators position;

- inadequate seating;

- travelling functions (drive, braking etc.);

- rolling over;

- equipment for loading fertilizer into the machine;

- an auxiliary engine;

- moving parts for power transmission except for strength requirements for guards.

ISO 4254-8:2018 is neither applicable to maintenance or repairs carried out by professional service personnel nor to environmental hazards (except noise).

ISO 4254-8:2018 is not applicable to the following:

- combined seed and fertilizer drills which create a soil trench and deposit fertilizer in said trench;

- machines for distributing granulated pesticides;

- pedestrian controlled distributors;

- knapsack distributors.

ISO 4254-8:2018 is not applicable to solid fertilizer distributors which are manufactured before the date of its publication.

When requirements of this document are different from those which are stated in ISO 4254‑1, the requirements of this document take precedence over the requirements of ISO 4254‑1 for machines that have been designed and built according to the provisions of this document.

Best Sellers

GSO 150-2:2013
 
Gulf Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
YSMO GSO 150-2:2020
GSO 150-2:2013 
Yemeni Technical Regulation
Expiration dates for food products - Part 2 : Voluntary expiration dates
YSMO GSO 2055-1:2020
GSO 2055-1:2015 
Yemeni Standard
HALAL FOOD - Part 1 : General Requirements
GSO 2055-1:2015
 
Gulf Technical Regulation
HALAL FOOD - Part 1 : General Requirements

Recently Published

ISO 18990:2025
 
International Standard
Measurement of radioactivity in urine-238Pu, 239Pu and 240Pu — Test method using alpha spectrometry or ICP-MS
ISO 11929-3:2025
 
International Standard
Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 3: Applications to unfolding methods
ISO 11929-2:2025
 
International Standard
Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 2: Advanced applications
ISO 18243:2025
 
International Standard
Electrically propelled mopeds and motorcycles — Test specifications and safety requirements for lithium-ion battery systems