GSO ASTM C1666/C1666M:2025
ASTM C1666/C1666M:08(2023)
Gulf Standard
Current Edition
·
Approved on
14 October 2025
Standard Specification for Alkali Resistant (AR) Glass Fiber for GFRC and Fiber-Reinforced Concrete and Cement
GSO ASTM C1666/C1666M:2025 Files
No files for this standard are available in the store currently.
Obtaining this standard through the store is currently unavailable. You can acquire it directly from its source.
GSO ASTM C1666/C1666M:2025 Scope
1.1 This specification covers minimum requirements for alkali resistant (AR) glass fibers intended for use in glass fiber-reinforced concrete (GFRC) by spray-up, glass fiber-reinforced concrete premix, fiber-reinforced concrete, and other cementitious based products.
1.2 This specification provides for AR glass fiber types and configurations that can be readily incorporated into concrete mixes, typical physical properties, minimum zirconia content, and prescribes testing procedures to establish conformance to these requirements.
1.3 This specification does not address the types of coatings or lubricants used in the manufacturing process of the fibers.
1.4 In the case of conflict between a more stringent requirement of a product specification and a requirement of this specification, the product specification shall prevail. In the case of a conflict between a requirement of the product specification or a requirement of this specification and a more stringent requirement of the purchase order, the purchase order shall prevail. The purchase order requirements shall not take precedence if they, in any way, violate the requirements of the product specification or this specification; for example, by the waiving of a test requirement or by making a test requirement less stringent.
1.5 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the inch-pound units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Best Sellers From Construction and Building Sector
GSO 1431:2002
Gulf Technical Regulation
Sanitary appliances - pressurized flushing devices

GSO 1427:2008
Gulf Standard
Ceramic Sanitary Appliances - Western Water Closets

GSO 1421:2002
Gulf Technical Regulation
Hollow blocks made from clay for walls

GSO 440:2007
Gulf Standard
Calcium Silicate bricks

Recently Published from Construction and Building Sector
GSO ASTM C109/C109M:2025
ASTM C109/C109M:24
Gulf Standard
Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 50 mm [2 in.] Cube Specimens)


GSO ASTM C494/C494M:2025
ASTM C494/C494M:24
Gulf Standard
Standard Specification for Chemical Admixtures for Concrete


GSO ASTM C1767:2025
ASTM C1767:21
Gulf Standard
Standard Specification for Stainless Steel Jacketing for Insulation


GSO ISO 22185-2:2025
ISO 22185-2:2024
Gulf Standard
Diagnosing moisture damage in buildings and implementing countermeasures — Part 2: Assessment of conditions

