GSO IEC 62752:2025
IEC 62752:2024
Gulf Standard
Current Edition
·
Approved on
14 October 2025
In-cable control and protection device (IC-CPD) for mode 2 charging of electric road vehicles
GSO IEC 62752:2025 Files
No files for this standard are available in the store currently.
Obtaining this standard through the store is currently unavailable. You can acquire it directly from its source.
GSO IEC 62752:2025 Scope
IEC 62752:2024 This International Standard applies to in-cable control and protection devices (IC-CPDs) for mode 2 charging of electric road vehicles, hereafter referred to as "IC-CPD", including control and safety functions.
This document applies to portable devices performing simultaneously the functions of detection of the residual current, of comparison of the value of this current with the residual operating value and of opening of the protected circuit when the residual current exceeds this value.
This second edition cancels and replaces the first edition published in 2016, and Amendment 1:2018. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
- Subclause 8.3.1 revised to add requirements for a mandatory control device that detects the temperature of the current carrying parts in the household plug;
- Test requirements added in a new Subclause 9.36 for the temperature control device;
- Harmonization of EMC requirements with new edition of IEC 61543 and IEC 61851-21-2;
- General improvement of test and requirements.
This document applies to portable devices performing simultaneously the functions of detection of the residual current, of comparison of the value of this current with the residual operating value and of opening of the protected circuit when the residual current exceeds this value.
This second edition cancels and replaces the first edition published in 2016, and Amendment 1:2018. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
- Subclause 8.3.1 revised to add requirements for a mandatory control device that detects the temperature of the current carrying parts in the household plug;
- Test requirements added in a new Subclause 9.36 for the temperature control device;
- Harmonization of EMC requirements with new edition of IEC 61543 and IEC 61851-21-2;
- General improvement of test and requirements.
Best Sellers From Electrical Sector
YSMO GSO 2530:2023
GSO 2530:2016
Yemeni Technical Regulation
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
GSO 2530:2016
Gulf Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
GSO 34:2007
Gulf Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR
MOTOR VEHICLES AND INTERNAL
COMBUSTION ENGINES
GSO 35:2007
Gulf Standard
Methods of test
for lead-acid starter batteries used for motor vehicles
and internal combustion engines
Recently Published from Electrical Sector
GSO ISO 20816-21:2026
ISO 20816-21:2025
Gulf Standard
Mechanical vibration — Measurement and evaluation of machine vibration — Part 21: Horizontal axis wind turbines
GSO IEC 63522-32:2026
IEC 63522-32:2025
Gulf Standard
Electrical relays - Tests and measurements - Part 32: Acoustic noise
GSO IEC 60227-5:2026
IEC 60227-5:2024
Gulf Standard
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords)
GSO IEC TS 62600-301:2026
IEC TS 62600-301:2019
Gulf Standard
Marine energy - Wave, tidal and other water current converters - Part 301: River energy resource assessment