GSO IEC 61820-3-2:2025
IEC 61820-3-2:2023
Gulf Standard
Current Edition
·
Approved on
14 October 2025
Electrical installations for lighting and beaconing of aerodromes - Part 3-2: Requirements for power supplies - Particular requirements for series circuits
GSO IEC 61820-3-2:2025 Files
English
67 Pages
Current Edition
Reference Language
Obtaining this standard through the store is currently unavailable. You can acquire it directly from its source.
GSO IEC 61820-3-2:2025 Scope
IEC 61820-3-2:2023 specifies the requirements for power electronic converter systems (PECS) dedicated to powering aeronautical ground lighting (AGL) circuits with series circuit topology. An example of a traditional implementation is an AGL circuit with 6,6 A RMS nominal current, powered by a constant current regulator (CCR). In addition to revising the requirements for 6,6 A CCR setups, this document introduces requirements for general PECS for new AGL systems including systems specifically designed for LED based luminaires.
This first edition cancels and replaces IEC 61822 published in 2009. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to IEC 61822:2009:
a) introduction of power electronic converter systems (PECS) to be used in the aeronautical ground lighting systems other than the 6,6 A aeronautical ground lighting systems;
b) introduction of classification for different device types;
c) introduction of IEC 62477-1:2022 and IEC 62477-2:2018 as the basis for safety related requirements.
This first edition cancels and replaces IEC 61822 published in 2009. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to IEC 61822:2009:
a) introduction of power electronic converter systems (PECS) to be used in the aeronautical ground lighting systems other than the 6,6 A aeronautical ground lighting systems;
b) introduction of classification for different device types;
c) introduction of IEC 62477-1:2022 and IEC 62477-2:2018 as the basis for safety related requirements.
Best Sellers From Electrical Sector
YSMO GSO 2530:2023
GSO 2530:2016
Yemeni Technical Regulation
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
GSO 2530:2016
Gulf Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
GSO 34:2007
Gulf Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR
MOTOR VEHICLES AND INTERNAL
COMBUSTION ENGINES
GSO 35:2007
Gulf Standard
Methods of test
for lead-acid starter batteries used for motor vehicles
and internal combustion engines
Recently Published from Electrical Sector
GSO 2693:2026
Gulf Technical Regulation
The GCC Terrestrial Radio Receiver Specifications for AM/FM/T-DAB+
GSO IEC 62841-2-9:2026
IEC 62841-2-9:2015
Gulf Standard
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-9: Particular requirements for hand-held tappers and threaders
GSO IEC 61557-14:2026
IEC 61557-14:2023
Gulf Standard
Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment of machinery
GSO EN 54-17:2026
EN 54-17:2005
Gulf Standard
Fire detection and fire alarm systems - Part 17: Short-circuit isolators