GSO IEC 62899-202-10:2024
IEC 62899-202-10:2023
Gulf Standard
Current Edition
·
Approved on
14 October 2024
Printed electronics - Part 202-10: Materials - Resistance measurement method for thermoformable conducting layer
GSO IEC 62899-202-10:2024 Files
No files are available for this standard right now!
GSO IEC 62899-202-10:2024 Scope
IEC 62899-202-10:2023 defines terminology and measurement methods for the resistance change of conductive ink layer(s) as a function of thermoplastic elongation. The method measures resistance changes in-situ or post-elongation.
This document is applicable to thermoformable substrates with conductive ink layers. The thermoformable substrates can have printed graphic ink as well and cover insulation layers.
This document is applicable to thermoformable substrates with conductive ink layers. The thermoformable substrates can have printed graphic ink as well and cover insulation layers.
Best Sellers From Electrical Sector
YSMO GSO 2530:2023
GSO 2530:2016
Yemeni Technical Regulation
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
GSO 2530:2016
Gulf Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
GSO 34:2007
Gulf Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR
MOTOR VEHICLES AND INTERNAL
COMBUSTION ENGINES
GSO 35:2007
Gulf Standard
Methods of test
for lead-acid starter batteries used for motor vehicles
and internal combustion engines
Recently Published from Electrical Sector
GSO IEC 61076-2-116:2024
IEC 61076-2-116:2022
Gulf Standard
Connectors for electrical and electronic equipment - Product requirements - Part 2 -116: Detail specification for circular connectors size 15 with up to 3+PE power contacts and auxiliary contacts, with bayonet-locking.
GSO IEC 61076-2-115:2024
IEC 61076-2-115:2023
Gulf Standard
Connectors for electrical and electronic equipment - Product requirements - Part 2-115: Circular connectors - Detail specification for 12-pole shielded connectors with 2 A rated current and IP65/IP67 metal housing with push-pull locking
GSO IEC 60034-3:2024
IEC 60034-3:2020
Gulf Standard
Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines and for synchronous compensators
GSO IEC 61400-26-1:2024
IEC 61400-26-1:2019
Gulf Standard
Wind energy generation systems - Part 26-1: Availability for wind energy generation systems