GSO OIML R100-3:2017
OIML R 100-3:2013
Gulf Standard
Current Edition
·
Approved on
27 April 2017
Atomic absorption spectrometer systems for measuring metal pollutants Part 3: Test report format
GSO OIML R100-3:2017 Files
Arabic
9 Pages
Current Edition
Free
English
8 Pages
Current Edition
Reference Language
Free
GSO OIML R100-3:2017 Scope
1.1 R 100-1:2013 and R 100-2:2013 provide requirements for defining, testing and verifying the performance of atomic absorption spectrometer (AAS) systems when used for measurements of metal pollutants in water as mandated by national laws and regulations.
1.2 This test report is mandatory in the context of the OIML Certificate System, but may also be used for other purposes. It shall include the information below.
Best Sellers From Metrology Sector
GSO OIML R87:2021
OIML R87:2016
Gulf Standard
Quantity of product in prepackages
GSO OIML R79:2021
OIML R79:2015
Gulf Standard
Labeling requirements for prepackages
GSO OIML R 76-1:2009
OIML R 76-1:2006
Gulf Standard
Non-automatic weighing instruments –
Part 1: Metrological and technical requirements - Tests
GSO OIML R111-1:2007
OIML R111-1:2004
Gulf Standard
Weights of classes E1, E2,F1,F2,M1,M1-2,M2,M2-3 and M3
Part 1: Metrological and Technical requirements
Recently Published from Metrology Sector
GSO ISO 10713:2026
ISO 10713:2025
Gulf Standard
Jewellery and precious metals — Gold alloy coatings
GSO ISO 20816-2:2026
ISO 20816-2:2017
Gulf Standard
Mechanical vibration — Measurement and evaluation of machine vibration — Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
GSO IEC 61452:2026
IEC 61452:2021
Gulf Standard
Nuclear instrumentation - Measurement of activity or emission rate of gamma-ray emitting radionuclides - Calibration and use of germanium-based spectrometers
GSO ISO 5059-1:2026
ISO 5059-1:2025
Gulf Standard
Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Design and metrological characteristics of two-point inside micrometers