GSO IEC 60487-2-1:2015
IEC 60487-2-1:1981
Gulf Standard
Current Edition
·
Approved on
03 September 2015
Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2-1: Measurements for sub-systems. General
GSO IEC 60487-2-1:2015 Files
English
7 Pages
Current Edition
Reference Language
Obtaining this standard through the store is currently unavailable. You can acquire it directly from its source.
GSO IEC 60487-2-1:2015 Scope
The methods of measurement described in the following sections of this part apply to subsystems including those which are not part of a simulated system (e.g. antennas). The methods are intended to cover those electrical characteristics which influence the performance of radio-relay systems and should be used in conjunction with Part 1 of this publication: Measurements Common to Sub-systems and Simulated Radio-relay Systems.
Values for the various quantities to be measured are not specified since these should be given in the detailed equipment specification.
Best Sellers From Electrical Sector
YSMO GSO 2530:2023
GSO 2530:2016
Yemeni Technical Regulation
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
GSO 2530:2016
Gulf Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
GSO 34:2007
Gulf Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR
MOTOR VEHICLES AND INTERNAL
COMBUSTION ENGINES
GSO 35:2007
Gulf Standard
Methods of test
for lead-acid starter batteries used for motor vehicles
and internal combustion engines
Recently Published from Electrical Sector
GSO IEC 61076-2-116:2024
IEC 61076-2-116:2022
Gulf Standard
Connectors for electrical and electronic equipment - Product requirements - Part 2 -116: Detail specification for circular connectors size 15 with up to 3+PE power contacts and auxiliary contacts, with bayonet-locking.
GSO IEC 61076-2-115:2024
IEC 61076-2-115:2023
Gulf Standard
Connectors for electrical and electronic equipment - Product requirements - Part 2-115: Circular connectors - Detail specification for 12-pole shielded connectors with 2 A rated current and IP65/IP67 metal housing with push-pull locking
GSO IEC 60034-3:2024
IEC 60034-3:2020
Gulf Standard
Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines and for synchronous compensators
GSO IEC 61400-26-1:2024
IEC 61400-26-1:2019
Gulf Standard
Wind energy generation systems - Part 26-1: Availability for wind energy generation systems