GSO ISO 9785:2015
ISO 9785:2002
Gulf Standard
Current Edition
·
Approved on
03 September 2015
Ships and marine technology -- Ventilation of cargo spaces where vehicles with internal combustion engines are driven -- Calculation of theoretical total airflow required
GSO ISO 9785:2015 Files
English
10 Pages
Current Edition
Reference Language
70.52 USD
GSO ISO 9785:2015 Scope
This International Standard specifies methods of calculating the theoretical quantity of outdoor air required in cargo spaces of ships where vehicles with internal combustion engines are driven, in order to dilute the polluted air to within the permitted occupational exposure limits.
Annex A specifies average values of the amounts of pollutants in exhaust gases from vehicles with internal combustion engines driven in cargo spaces in ships.
Annex В gives general information and guidance as to good practice for the ventilation of cargo spaces in ships where vehicles with internal combustion engines may be driven.
Users of this International Standard should note that, while observing the requirements of the standard, they should at the same time ensure compliance with such statutory requirements, rules, and regulations as may be applicable to the individual ship concerned. Users should also refer to guidelines developed by the International Maritime Organization (IMO) contained in the Maritime Safety Committee Circular 729 (MSC Circ. 729), Guidelines and Recommendations for Ventilation systems in RO-RO Cargo Spaces.
Best Sellers From Mechanical Sector
GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
GSO 98:1988
Gulf Technical Regulation
MOTOR VEHICLES- FLAMMABILITY OF
INTERIOR MATERIALS AND THEIR
TESTING METHODS
GSO 1780:2010
Gulf Technical Regulation
Motor vehicle-vehicle identification number (vin) - requirements
Recently Published from Mechanical Sector
GSO EN 13445-6:2024
EN 13445-6:2021
Gulf Standard
Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron
GSO ISO 11154:2024
ISO 11154:2023
Gulf Standard
Road vehicles — Roof load carriers
GSO ISO 10468:2024
ISO 10468:2023
Gulf Standard
Glass-reinforced thermosetting plastics (GRP) pipes
— Determination of the ring creep properties under wet or dry conditions
GSO ISO 10300-1:2024
ISO 10300-1:2023
Gulf Standard
Calculation of load capacity of bevel gears — Part 1: Introduction and general influence factors