GSO IEC 61144:2015
IEC 61144:1992
Gulf Standard
Current Edition
·
Approved on
03 September 2015
Test method for the determination of oxygen index of insulating liquids
GSO IEC 61144:2015 Files
English
20 Pages
Current Edition
Reference Language
Obtaining this standard through the store is currently unavailable. You can acquire it directly from its source.
GSO IEC 61144:2015 Scope
1.1 This International Standard describes a method for measuring the oxygen index of
insulating liquids.
1.2 The general principles of this test method as applied to solids are described in
ISO 4589.
1.3 This method is generally considered as a method describing one of the combustion
characteristics of products.
1.4 This test method is applicable to all liquids, the viscosity of which is lower than or
equal to 50 mm 2/s at 40 °C ± 1 °C.
WARNING: When burning a liquid, hazardous gases and/or vapours may be
evolved. Adequate precaution shall be taken to protect the operator.
Best Sellers From Metrology Sector
GSO OIML R87:2021
OIML R87:2016
Gulf Standard
Quantity of product in prepackages
GSO OIML R79:2021
OIML R79:2015
Gulf Standard
Labeling requirements for prepackages
GSO OIML R 76-1:2009
OIML R 76-1:2006
Gulf Standard
Non-automatic weighing instruments –
Part 1: Metrological and technical requirements - Tests
GSO OIML R111-1:2007
OIML R111-1:2004
Gulf Standard
Weights of classes E1, E2,F1,F2,M1,M1-2,M2,M2-3 and M3
Part 1: Metrological and Technical requirements
Recently Published from Metrology Sector
GSO ISO 20816-2:2026
ISO 20816-2:2017
Gulf Standard
Mechanical vibration — Measurement and evaluation of machine vibration — Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
GSO ISO 23783-2:2026
ISO 23783-2:2022
Gulf Standard
Automated liquid handling systems — Part 2: Measurement procedures for the determination of volumetric performance
GSO ISO 16610-45:2026
ISO 16610-45:2025
Gulf Standard
Geometrical product specifications (GPS) — Filtration — Part 45: Morphological profile filters: Segmentation
GSO ISO 4064-1:2026
ISO 4064-1:2024
Gulf Standard
Water meters for cold potable water and hot water — Part 1: Metrological and technical requirements