GSO IEC 60169-11:2014
IEC 60169-11:1977
Gulf Standard
Current Edition
·
Approved on
25 December 2014
Radio-frequency connectors - Part 11: R.F. coaxial connectors with inner diameter of outer conductor 9.5 mm (0.374 in) with screw coupling - Characteristic impedance 50 ohms (Type 4.1/9.5)
GSO IEC 60169-11:2014 Files
English
29 Pages
Current Edition
Reference Language
Obtaining this standard through the store is currently unavailable. You can acquire it directly from its source.
GSO IEC 60169-11:2014 Scope
This standard concerns r.f. coaxial connectors for use with r.f. cables, both flexible and semi-rigid, with air dielectric interface and high mechanical stability to withstand severe environmental exposure.
The connectors provide low reflection in the microwave region up to 14 GHz and they are water- and air-tight against a pressure difference of 3 bar. For this type of connector, cables 96-2 IEC 50-7-1/2/3/4 and 6 of IEC Publication 96-2, Radio frequency Cables, Part 2: Relevant Cable Specifications, are recommended. This type is known commercially as the 4.1/9.5 connector
Best Sellers From Electrical Sector
YSMO GSO 2530:2023
GSO 2530:2016
Yemeni Technical Regulation
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
GSO 2530:2016
Gulf Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
GSO 34:2007
Gulf Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR
MOTOR VEHICLES AND INTERNAL
COMBUSTION ENGINES
GSO 35:2007
Gulf Standard
Methods of test
for lead-acid starter batteries used for motor vehicles
and internal combustion engines
Recently Published from Electrical Sector
GSO IEC 62149-3:2024
IEC 62149-3:2023
Gulf Standard
Fibre optic active components and devices - Performance standards - Part 3: Modulator-integrated laser diode transmitters for 40-Gbit/s fibre optic transmission systems
GSO IEC 62386-102:2024
IEC 62386-102:2022
Gulf Standard
Digital addressable lighting interface - Part 102: General requirements - Control gear
GSO IEC 61076-8-103:2024
IEC 61076-8-103:2023
Gulf Standard
Connectors for electrical and electronic equipment - Product requirements - Part 8-103: Power connectors – Detail specification for 2P+PE circular connectors with 20 A rated current and push-pull locking IP65/IP67 with metal housing
GSO IEC 60393-3:2024
IEC 60393-3:2023
Gulf Standard
Potentiometers for use in electronic equipment - Part 3: Sectional specification: Rotary precision potentiometers