GSO IEC 61834-7:2014

IEC 61834-7:2001
Gulf Standard   Current Edition · Approved on 25 December 2014

Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 7: EDTV2 format

GSO IEC 61834-7:2014 Files

English 25 Pages
Current Edition Reference Language

GSO IEC 61834-7:2014 Scope

This part of IEC 61834 is an extension to the SD specification (SD mode) and covers the features necessary for the recording and reproduction of EDTV2 signals. While all DVCRs must have the capability of recording and/or playback in SD (SP) mode, this extension is optional. For this part 7, the data track structure of a track is defined by APT = 000b which consists of four areas as described in 4.3.2 of IEC 61834-1, and AP1 = AP2 = AP3 = 000b. NOTE EDTV2 signal format is described in the specification: BTA T-1004-1995: Video signal interfaces for EDTV2 studio equipment.

Best Sellers From Electrical Sector

YSMO GSO 2530:2023
GSO 2530:2016 
Yemeni Technical Regulation
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
GSO 2530:2016
 
Gulf Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
GSO 34:2007
 
Gulf Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR MOTOR VEHICLES AND INTERNAL COMBUSTION ENGINES
GSO 35:2007
 
Gulf Standard
Methods of test for lead-acid starter batteries used for motor vehicles and internal combustion engines

Recently Published from Electrical Sector

GSO IEC 63522-32:2026
IEC 63522-32:2025 
Gulf Standard
Electrical relays - Tests and measurements - Part 32: Acoustic noise
GSO IEC PAS 63629:2026
IEC PAS 63629:2025 
Gulf Standard
PSR – Specific rules for luminaires
GSO IEC 60704-2-3:2026
IEC 60704-2-3:2025 
Gulf Standard
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-3: Particular requirements for dishwashers
GSO IEC 60270:2026
IEC 60270:2025 
Gulf Standard
High-voltage test techniques – Charge-based measurement of partial discharges