GSO OIML R14:2014

OIML R 14:1995
Gulf Standard   Current Edition · Approved on 02 April 2014

Polarimetric saccharimeters graduated in accordance with the ICUMSA International Sugar Scale

GSO OIML R14:2014 Files

English 14 Pages
Current Edition Reference Language
Free

GSO OIML R14:2014 Scope

Polarimetric saccharimeters are instruments which measure the relationship between the optical rotation caused by an aqueous solution of a sample and that caused by a pure sucrose solution of prescribed concentration, using the same polarized light. This Recommendation applies to polarimetric saccharimeters that are graduated in sugar degrees (!Z) in accordance with the ICUMSA International Sugar Scale (see Annex A) and that belong to the visual or photo-electric type, including: a) saccharimeters with a rotating polarizer or analyser of which the angle of rotation can be measured and which are illuminated by a monochromatic light source of known wavelength which must be between 540 nm and 633 nm; b) saccharimeters with quartz wedge compensation and illuminated either by a monochromatic light source of known wavelength which must be between 540 nm and 633 nm, or by the light of an incandescent lamp filtered in such a way that the distribution of the spectral energy from the lamp, arising from the degree of spectral filtration by the filter and from the spectral sensitivity of the detector (eye or photo-multiplier), permits the use of radiation of effective wavelength 587 nm; c) saccharimeters which operate according to a principle of measurement other than those given in (a) and (b).

Best Sellers From Metrology Sector

GSO OIML R87:2021
OIML R87:2016 
Gulf Standard
Quantity of product in prepackages
GSO OIML R79:2021
OIML R79:2015 
Gulf Standard
Labeling requirements for prepackages
GSO OIML R 76-1:2009
OIML R 76-1:2006 
Gulf Standard
Non-automatic weighing instruments – Part 1: Metrological and technical requirements - Tests
GSO OIML R111-1:2007
OIML R111-1:2004 
Gulf Standard
Weights of classes E1, E2,F1,F2,M1,M1-2,M2,M2-3 and M3 Part 1: Metrological and Technical requirements

Recently Published from Metrology Sector

GSO ISO 10713:2026
ISO 10713:2025 
Gulf Standard
Jewellery and precious metals — Gold alloy coatings
GSO ISO 20816-2:2026
ISO 20816-2:2017 
Gulf Standard
Mechanical vibration — Measurement and evaluation of machine vibration — Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
GSO IEC 61452:2026
IEC 61452:2021 
Gulf Standard
Nuclear instrumentation - Measurement of activity or emission rate of gamma-ray emitting radionuclides - Calibration and use of germanium-based spectrometers
GSO ISO 5059-1:2026
ISO 5059-1:2025 
Gulf Standard
Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Design and metrological characteristics of two-point inside micrometers