GSO ISO/TS 11602-1:2013

ISO/TS 11602-1:2010
Gulf Standard   Current Edition · Approved on 09 September 2013

Fire protection - Portable and wheeled fire extinguishers – Part 1: Selection and installation

GSO ISO/TS 11602-1:2013 Files

Arabic 14 Pages
Current Edition
121.89 USD
English 11 Pages
Current Edition Reference Language
80.85 USD

GSO ISO/TS 11602-1:2013 Scope

This part of GSO ISO 11602 gives requirements for the selection and installation of portable and wheeled fire extinguishers. It is intended as a companion to GSO ISO/TS 11602-2 . Portable fire extinguishers are a first line of defence against fires of limited size. They are needed even if the property is equipped with automatic sprinklers, standpipe and hose, or other fixed protection equipment . This part of GSO ISO 11602 is not applicable to permanently installed systems for fire extinguishment, even though portions of such systems may be portable (such as hose and nozzles attached to a fixed supply of extinguishing media). Its requirements are minimum requirements. The use of larger, higher-rated or greater numbers of extinguishers will, in general, improve protection . Extinguishers for use on board aircraft, watercraft and vehicles are outside the scope of GSO ISO 11602 .

Best Sellers From Mechanical Sector

GSO 42:2015
 
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
 
Gulf Technical Regulation
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS
GSO 98:1988
 
Gulf Technical Regulation
MOTOR VEHICLES- FLAMMABILITY OF INTERIOR MATERIALS AND THEIR TESTING METHODS
GSO 2698:2022
 
Gulf Standard
Technical Requirements for Electric Vehicles

Recently Published from Mechanical Sector

GSO 1616:2002
 
Gulf Standard
Domestic and contract furniture-part 2 : methods of test for settees.
GSO 1620:2002
 
Gulf Standard
Domestic and contact furiniture -part 4 :methods of testing tables.
GSO 198:1994
 
Gulf Standard
CHEMICAL ANALYSIS OF CARBON STEEL – DETERMINATION OF NITROGEN
GSO 376:1994
 
Gulf Standard
Code of practice for the inspection and testing of steam and hot water boilers -- Part 6: Periodic internal inspection