GSO ISO 2603:2013
Gulf Standard
Current Edition
·
Approved on
01 April 2013
·
Booths for simultaneous interpretation -- General characteristics and equipment
GSO ISO 2603:2013 Files
English
13 Pages
Current Edition
Reference Language
73.71 USD
GSO ISO 2603:2013 Scope
This International Standard lays down basic specifications to be considered when initial plans are prepared for building
or renovating built-in booths for simultaneous interpretation in new or existing buildings.
It is applicable to all types of built-in booths with built-in or portable equipment.
NOTE 1 Mobile booths for simultaneous interpretation are specified in ISO 4043.
In designing new buildings, booths should be optimally integrated into the structure so that the conference room and
the booths constitute a well-balanced unit. Design should also provide daylight for the conference hall and booths.
The requirements of clauses 4 and 5 apply to booths with built-in equipment, as defined in 3.1, and booths with
portable equipment, as defined in 3.2.
The dimensional requirements apply equally to semi-permanent booths, as defined in 3.3, for which all other
requirements should apply as far as is possible.
In addition to structural and design specifications, this International Standard specifies those components of typical
conference facilities which form the interpreters working environment.
NOTE 2 Clause 12 gives indications concerning the use of public address systems in conjunction with simultaneous interpretation
systems.
Best Sellers From Metrology Sector
GSO OIML R87:2021
OIML R87:2016
Gulf Standard
Quantity of product in prepackages
GSO OIML R79:2021
OIML R79:2015
Gulf Standard
Labeling requirements for prepackages
GSO OIML R 76-1:2009
OIML R 76-1:2006
Gulf Standard
Non-automatic weighing instruments –
Part 1: Metrological and technical requirements - Tests
GSO OIML R111-1:2007
OIML R111-1:2004
Gulf Standard
Weights of classes E1, E2,F1,F2,M1,M1-2,M2,M2-3 and M3
Part 1: Metrological and Technical requirements
Recently Published from Metrology Sector
GSO ISO 12039:2024
ISO 12039:2019
Gulf Standard
Stationary source emissions — Determination of the mass concentration of carbon monoxide, carbon dioxide and oxygen in flue gas — Performance characteristics of automated measuring systems
GSO ISO 11426:2024
ISO 11426:2021
Gulf Standard
Jewellery and precious metals — Determination of gold — Cupellation method (fire assay)
GSO ISO 748:2024
ISO 748:2021
Gulf Standard
Hydrometry — Measurement of liquid flow in open channels — Velocity area methods using point velocity measurements
GSO IEC 62828-4:2024
IEC 62828-4:2020
Gulf Standard
Reference conditions and procedures for testing industrial and process measurement transmitters - Part 4: Specific procedures for level transmitters