GSO ISO 10648-2:2013
ISO 10648-2:1994
Gulf Standard
Current Edition
·
Approved on
01 April 2013
Containment enclosures -- Part 2: Classification according to leak tightness and associated checking methods
GSO ISO 10648-2:2013 Files
English
14 Pages
Current Edition
Reference Language
USD
119.19
GSO ISO 10648-2:2013 Scope
This part of ISO 10648 gives a classification of containment enclosures according to leak tightness and specifies methods for checking this tightness for the following tests:
— manufacturing test at the factory,
— acceptance test at the laboratory,
— test before commissioning,
— periodical tests during operation.
These last two tests shall comply with relevant standards and local regulations.
The object of this part of ISO 10648 is to provide manufacturers, suppliers, users and the competent authorities with uniform principles in test procedures for testing the leak tightness of containment enclosures and for ascertaining the leak rate.
The tests cover the containment enclosures equipped with the basic components (see ISO 10648-1:—, annex B). All openings (for example glove ports and ventilation openings) are sealed with tight-fitting or sealable covers.
If additional equipments are to be used, a new control test taking into account these equipments should be performed.
Best Sellers From Electrical Sector
YSMO GSO 2530:2023
GSO 2530:2016
Yemeni Technical Regulation
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
GSO 2530:2016
Gulf Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
GSO 34:2007
Gulf Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR
MOTOR VEHICLES AND INTERNAL
COMBUSTION ENGINES
GSO 35:2007
Gulf Standard
Methods of test
for lead-acid starter batteries used for motor vehicles
and internal combustion engines
Recently Published from Electrical Sector
GSO IEC 61362:2026
IEC 61362:2024
Gulf Standard
Guidelines to specification of hydraulic turbine governing systems
GSO IEC TS 62271-313:2026
IEC TS 62271-313:2025
Gulf Standard
High-voltage switchgear and controlgear - Part 313: Direct current circuit-breakers
GSO IEC 60227-5:2026
IEC 60227-5:2024
Gulf Standard
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords)
GSO IEC TS 62600-301:2026
IEC TS 62600-301:2019
Gulf Standard
Marine energy - Wave, tidal and other water current converters - Part 301: River energy resource assessment