GSO ISO 17484-1:2013
Gulf Standard
Current Edition
·
Approved on
01 April 2013
·
Plastics piping systems - Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) - Part 1: Specifications for systems
GSO ISO 17484-1:2013 Files
English
33 Pages
Current Edition
Reference Language
73.71 USD
GSO ISO 17484-1:2013 Scope
This part of ISO 17484 specifies the general requirements and the performance requirements for multilayer
pipe systems based on pipes, fittings and their joints intended to be used for gas supply within buildings.
PE-X and PE pipes composed of one stress-designed layer, adhesive and a barrier layer are also covered by
this part of ISO 17484.
This part of ISO 17484 gives guidance for the design of piping systems consisting of multilayer pipes based
on thermoplastics, for which at least 60 % of the wall thickness is polymeric material. Polymeric materials
intended for stress-designed layers and all inner layers are required to be polyethylene (PE) and/or
crosslinked polyethylene (PE-X) in accordance with Annex A of this part of ISO 17484. The outer layer of a
metal multilayer is required to be PE or PE-X. PE-RT is considered as PE but with specific properties
concerning hoop-stress performance (see 5.4.2.).
This part of ISO 17484 applies to systems that operate at temperatures of − 20 °C up to 60 °C.
For the purpose of this part of ISO 17484, crosslinked polyethylene (PE-X) and adhesive layers are
considered as thermoplastic materials.
For sizes greater than 63 mm the requirements of ISO 18225 have to be fulfilled in addition.
This part of ISO 17484 is applicable for piping systems used in buildings to supply gas with a maximum
operating pressure up to and including 500 kPa (5 bar) 1).
This standard applies to the following fuels:
⎯ Category D gaseous fuel: natural gas; see ISO 13623;
⎯ Category E gaseous fuel: LPG vapour, and natural gas or LPG vapour; see ISO 13623.
Best Sellers From Chemical and Textile Sector
GSO 575:2016
Gulf Standard
Facial tissue - paper
GSO 1046:2021
Gulf Standard
Cosmetic Products - Perfumery Products based on Ethanol
GSO 2640:2021
Gulf Standard
Cosmetic Products - General Requirements of Soaps
GSO 2055-4:2021
Gulf Standard
Halal Products- Part 4: Requirements for Halal Cosmetics and Personal care
Recently Published from Chemical and Textile Sector
GSO 2528:2024
Gulf Technical Regulation
Cosmetic products – Technical Regulation of Cosmetic and Personal Care Products Claims
GSO 1943:2024
Gulf Technical Regulation
Cosmetic Products – Safety Requirements of Cosmetics and Personal Care Products
GSO ISO 23674:2024
ISO 23674:2022
Gulf Standard
Cosmetics — Analytical methods — Direct determination of traces of mercury in cosmetics by thermal decomposition and atomic absorption spectrometry (mercury analyser)
GSO ASTM D7132:2024
ASTM D7132:19
Gulf Standard
Standard Test Method for Determination of Retained Blowing Agent in Extruded Polystyrene Foam