GSO ISO 7096:2011

ISO 7096:2000
Gulf Standard   Current Edition · Approved on 12 October 2011

Earth-moving machinery -- Laboratory evaluation of operator seat vibration

GSO ISO 7096:2011 Files

English 21 Pages
Current Edition Reference Language
USD 162.59

GSO ISO 7096:2011 Scope

1.1 This International Standard specifies, in accordance with ISO 10326-1, a laboratory method for measuring and evaluating the effectiveness of the seat suspension in reducing the vertical whole-body vibration transmitted to the operator of earth-moving machines at frequencies between 1 Hz and 20 Hz. It also specifies acceptance criteria for application to seats on different machines. 1.2 This International Standard is applicable to operator seats used on earth-moving machines as defined in ISO 6165. 1.3 This International Standard defines the input spectral classes required for the following earth-moving machines. Each class defines a group of machines having similar vibration characteristics: — rigid frame dumpers > 4 500 kg operating mass1) — articulated frame dumpers — scrapers without axle or frame suspension2) — wheel-loaders > 4 500 kg operating mass1) — graders — wheel-dozers — soil compactors (wheel type) — backhoe-loaders — crawler loaders — crawler-dozers ≤ 50 000 kg operating mass1),3) — compact dumpers ≤ 4 500 kg operating mass1) — compact loaders ≤ 4 500 kg operating mass1) — skid-steer loaders ≤ 4 500 kg operating mass1) 1.4 The following machines impart sufficiently low vertical vibration inputs at frequencies between 1 Hz and 20 Hz to the seat during operation that these seats do not require suspension for the attenuation of transmitted vibration: — excavators, including walking excavators and cable excavators4) — trenchers — landfill compactors — non-vibratory rollers — milling machines — pipelayers — finishers — vibratory rollers 1.5 The tests and criteria defined in this International Standard are intended for operator seats used in earthmoving machines of conventional design. NOTE Other tests may be appropriate for machines with design features that result in significantly different vibration characteristics. 1.6 Vibration which reaches the operator other than through his seat, for example that sensed by his feet on the platform or control pedals or by his hands on the steering-wheel, is not covered.

Best Sellers From Mechanical Sector

GSO 42:2015
 
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
 
Gulf Technical Regulation
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS
GSO 98:1988
 
Gulf Technical Regulation
MOTOR VEHICLES- FLAMMABILITY OF INTERIOR MATERIALS AND THEIR TESTING METHODS
GSO 2698:2022
 
Gulf Standard
Technical Requirements for Electric Vehicles

Recently Published from Mechanical Sector

GSO ISO 8741:2026
ISO 8741:2025 
Gulf Standard
Fasteners — Reverse-taper grooved pins — Half-length progressive grooves
GSO ISO 8740:2026
ISO 8740:2025 
Gulf Standard
Fasteners — Parallel grooved pins, with chamfer point — Full-length diamond grooves
GSO ISO 34505:2026
ISO 34505:2025 
Gulf Standard
Road vehicles — Test scenarios for automated driving systems — Scenario evaluation and test case generation
GSO EN 131-3:2018+A1:2026
EN 131-3:2018+A1:2025 
Gulf Standard
Ladders - Part 3: Marking and user instructions