GSO OIML R114:2002

OIML R 114:1995
Gulf Technical Regulation   Current Edition · Approved on 21 October 2002

CLINICAL ELECTRICAL THERMOMETERS FOR CONTINUOUS MEASUREMENT

GSO OIML R114:2002 Files

Arabic 28 Pages
Current Edition
Free
English 20 Pages
Current Edition Reference Language
Free

GSO OIML R114:2002 Scope

1.1 This standard specifies the metrological and technical requirements for clinical electrical thermometers for continuous measurement of human or animal body temperature. Such instruments are normally used to monitor the temperature at appropriate body sites of a patient undergoing certain surgical procedures or during intensive care. 1.2 The measuring range of clinical temperature covered shall be a minimum of 35.5oC to 42.0oC, which is consistent with the range specified by Gulf Standard No GSO OIML R115: 2002 “Clinical thermometers, mercury-in-glass with maximum device”, 1.3 This standard applies to battery-or mains-powered instruments. 1.4 The instruments may be equipped to accommodate secondary indicators, printing devices, and other auxiliary devices. The metrological requirements for such accessories are not covered by this standard. 1.5 Clinical electrical thermometers designed to measure skin temperature are not covered by this standard “Clinical electrical thermometers with maximum device” are covered by GSO OIML R115 : 2002. 1.6 This standard does not exclude the use of any contact device based on other measurement principles that meets equivalent performance standards in continuously measuring temperature.

Best Sellers From Metrology Sector

GSO OIML R87:2021
OIML R87:2016 
Gulf Standard
Quantity of product in prepackages
GSO OIML R79:2021
OIML R79:2015 
Gulf Standard
Labeling requirements for prepackages
GSO OIML R 76-1:2009
OIML R 76-1:2006 
Gulf Standard
Non-automatic weighing instruments – Part 1: Metrological and technical requirements - Tests
GSO OIML R111-1:2007
OIML R111-1:2004 
Gulf Standard
Weights of classes E1, E2,F1,F2,M1,M1-2,M2,M2-3 and M3 Part 1: Metrological and Technical requirements

Recently Published from Metrology Sector

GSO ISO 25178-605:2026
ISO 25178-605:2025 
Gulf Standard
Geometrical product specifications (GPS) — Surface texture: Areal — Part 605: Design and characteristics of non-contact (point autofocus probe) instruments
GSO ISO 25178-603:2026
ISO 25178-603:2025 
Gulf Standard
Geometrical product specifications (GPS) — Surface texture: Areal — Part 603: Design and characteristics of non-contact (phase shifting interferometry) instruments
GSO ISO 5059-1:2026
ISO 5059-1:2025 
Gulf Standard
Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Design and metrological characteristics of two-point inside micrometers
GSO ISO 25178-602:2026
ISO 25178-602:2025 
Gulf Standard
Geometrical product specifications (GPS) — Surface texture: Areal — Part 602: Design and characteristics of non-contact (confocal chromatic probe) instruments