ISO 24212:2024

International Standard   Current Edition · Approved on 20 September 2024

Remediation techniques applied at contaminated sites

ISO 24212:2024 Files

English 99 Pages
Current Edition
251.98 USD

ISO 24212:2024 Scope

This document provides requirements and guidance on key aspects of remediation techniques. It describes the principles, main characteristics, advantages and limitations to be considered in the selection within an option appraisal of individual or combinations of in situ and on-site remediation techniques, including:

     the type of contaminants to be dealt with;

     current and/or intended site use;

     local legal, policy, socio-economic and environmental contexts.

This document is applicable to the remediation of contaminated sites, i.e. where soil, or soil gas, ambient air or groundwater are contaminated. It identifies which phase/matrix can be targeted by a technique, e.g. fluid (groundwater, gas, non-aqueous phase liquid) or solid, and which contaminant it can applied to. This document also provides information on hazards that can be associated with the implementation of remediation.

This document does not provide:

     an exhaustive list of remediation techniques;

     guidance on sites contaminated with radioactive substances, pathogenic or infectious agents, or “pyrotechnic devices” (e.g. unexploded ordnances);

     guidance on ex situ techniques that are set up off-site;

     a framework that covers all individual situations, or prescribes which technique(s) to use in a specific context.

Best Sellers

GSO 150-2:2013
 
Gulf Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
YSMO GSO 150-2:2020
GSO 150-2:2013 
Yemeni Technical Regulation
Expiration dates for food products - Part 2 : Voluntary expiration dates
YSMO GSO 2055-1:2020
GSO 2055-1:2015 
Yemeni Standard
HALAL FOOD - Part 1 : General Requirements
GSO 2055-1:2015
 
Gulf Technical Regulation
HALAL FOOD - Part 1 : General Requirements

Recently Published

ISO 4211-1:2025
 
International Standard
Furniture — Tests for surface finishes — Part 1: Assessment of resistance to cold liquids
ISO 11843-7:2025
 
International Standard
Capability of detection — Part 7: Methodology based on stochastic properties of instrumental noise
ISO 18750:2025
 
International Standard
Intelligent transport systems — Local dynamic map
ISO 4076:2025
 
International Standard
Polyphenylsulfone (PPSU) — Effect of time and temperature on expected strength