GSO ISO 11789:2014
ISO 11789:1999
Gulf Standard
Current Edition
·
Approved on
25 December 2014
Powered edgers with rigid cutting means -- Definitions, safety requirements and test procedures
GSO ISO 11789:2014 Files
English
35 Pages
Current Edition
Reference Language
187.15 USD
GSO ISO 11789:2014 Scope
This International Standard specifies mechanical safety requirements and test methods applicable to walk-behind powered edgers that employ rigid cutting means with a blade tip circle not more than 305 mm in diameter, and where the plane of the blade tip circle is designed to operate at not more than 15° from the vertical.
This International Standard applies to hand-held portable and powered edgers employing a rigid cutting element with a blade tip circle not more than 305 mm in diameter.
This International Standard also includes test methods for noise and vibration.
This International Standard does not cover edgers with cutting means of non-metallic filament line or freely pivoting non-metallic cutters.
This International Standard does not cover accessories or attachments that alter the function of the machine.
The electrical aspects of electrically powered edgers are not covered by this International Standard. For the electrical requirements applicable to electrically driven machines, reference should be made to IEC 60335-1.
NOTE — For motion control requirements related to self-propelled machines, reference should be made to ISO 5395.
Best Sellers From Mechanical Sector
GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS

GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS

GSO 98:1988
Gulf Technical Regulation
MOTOR VEHICLES- FLAMMABILITY OF
INTERIOR MATERIALS AND THEIR
TESTING METHODS

GSO 2698:2022
Gulf Standard
Technical Requirements for Electric Vehicles

Recently Published from Mechanical Sector
GSO ISO/TR 5262:2025
ISO/TR 5262:2023
Gulf Standard
Motorcycles — Guideline for verification of total running resistance force during mode running on a chassis dynamometer


GSO ISO/IEC 80079-20-1:2025
ISO/IEC 80079-20-1:2017
Gulf Standard
Explosive atmospheres — Part 20-1: Material characteristics for gas and vapour classification — Test methods and data



GSO ISO 22915-10:2025
ISO 22915-10:2023
Gulf Standard
Industrial trucks — Verification of stability — Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices


GSO ISO/TS 22133:2025
ISO/TS 22133:2023
Gulf Standard
Road vehicles — Test object monitoring and control for active safety and automated/autonomous vehicle testing — Functional requirements, specifications and communication protocol

